11
down before storing it.
If you use the hair dryer in a bathroom you need to
unplug it after use since the proximity of water can be
dangerous even when the dryer is turned off.
In order to ensure a better protection, it is advisable to
install in the main electrical circuit supplying the local
bath, a device to differential current, not greater than
30mA. Contact your technician for more info.
Do not keep appliance switched on continously for more
than 2 minutes.
Bring knob on "0" (OFF) position before inserting the
plug in the socket.
Do not grab the product near to the air outlet, use the
handle. Keep at least at 5cm from the head
DESCRIPTION G30002
1.
Airflow concentrator
2.
Main body
3.
Inlet air opening / Removable filter
4.
Cool-shot button
5.
2 speeds power switch
6.
Temperature switch
7.
Hook for hanging
OPERATING
-
Set the power switch (5) to "0" and plug the dryer into the power outlet.
-
This dryer operates with 2 speeds, set the button (5) to "I" for lower speed and "II" for higher speed.
-
Set the air temperature using the temperature switch (6).
-
Caution: the air concentrator (1) heats up quickly. When the dryer is running, do not touch it.
-
At the end of drying process, set the power switch (5) to "0" position.
-
Let the hairdryer cool down completely. (Approximately 10 minutes)
-
Once the unit is completely cold, store it out of the reach of children.
Temperature control switch
This device offers the possibility to select the temperature of the airflow. Set the temperature control switch
(6) to "O" for setting the airflow at room temperature, "I" for moderately hot air and "II" for hot air.
Cool-shot
The hair dryer constantly delivers a flow of hot air. Pushing the "Cool-shot" button (4), the internal resistance
will be temporarily disabled and in a few seconds the device will blow air at room temperature.
Professional AC motor
Thanks to the professional AC motor, the appliance has great efficiency and the airflow is always constant
and powerful.
Diffuser
The product is provided with a diffuser, that gives softness and volume to the hair. Assemble the diffuser by
removing the airflow concentrator (1), fitting it to the air outlet until it clicks.
CLEANING
-
Unplug the device from the electrical outlet and wait for the complete cooling down of the unit before
starting cleaning operations.
