Error code
Cause
Remedy
E01
After the machine closes the
vacuum cover and starts working,
E01 will be displayed if a certain
vacuum degree cannot be reached
within 10 seconds.
Press STOP to exit the fault.
Check whether the sealing ring is properly
installed.
Re-close the vacuum cover.
E02
Motor temperature fuse protection
due to overheating.
Stop the machine for 30 minutes and let the
temperature control fuse return to normal.
Technical Data:
Voltage: 220-240V~50Hz
Pump Pressure: -29.5”Hg (-999mbar)
Power: 380W
Seal wire width: 2*2.5 mm
Max bag width: 305 mm
Pump: dual
Size: 449*371*269 mm
Weight: 13 kg
The English version of the manual is an exact translation of the original manufacturer‘s instructions.Images
used in this manual are for illustrational purposes only and may differ from the actual product.