Operation Instructions
1. Preparing for use
1. Plug in the Blender, get ready to use.
2. This machine has a built-in safety device, please place the Jar on the blender base and make
sure it is stable, this will trigger the safety switch that enables the machine.
3. Fill the food ingredients into the Jar, do not exceed the MAX mark on the Jar.
4.
Warning:
Make sure the Jar Lids are fully in place and properly seated before operating the
blender.
5. Close the Noise Cover, start operation.
Blending Tips
1. When pouring the food ingredients into the Jar, please be aware of the order. Put liquids and
soft food material in first, then add ice, then add solid food ingredients.
2. It is better to start on slow speed and then transit to high speed. Always press the Lids tightly
into position before turning on the machine, you can take off the Lid plug and fill in ingredients
through the hole on top of the Lid during blending.
3. When processing hot drinks, start at slow speed and transit to high speed; when too much
food ingredients are inside the Jar, use the Pulse function to blend the loose ingredients before
resuming to regular blending.
4. During blending process, if the food ingredients are being pushed toward the Jar wall, it means
rotation speeds are too high and they should be reduced. If the food ingredients are moving above
the blade, it means the speed is too slow and needs to be increased.
5. Take the Jar off the machine base ONLY after machine has been turned off and blade rotation
has stopped completely.
6. This blender is equipped with an overload protection switch in order to protect the motor from
overload conditions. Please wait until the motor has cooled off (blow cool air on the base with a
fan to speed up the cooling process), then turn the machine on to restart.
If the motor hasn’t had enough time to cool, then the machine will not start or will start and run for
a short time before shutting off again.
Operation
Perfect Smoothie Acustic
1. When operating, keep a safe distance from the machine (20cm~).
2. Variable speed operation: Make sure to rotate the speed knob to the Minimum position when
start, then rotate the Timer knob to select desired mixing time duration. Push the ON/OFF switch
to on position, machine will run until the set time expires.
3. Pulse operation: The Pulse switch will run the machine at maximum speed while the switch is
depressed. When released, the pulse switch shuts off the machine.
4. When finished, turn the ON/OFF switch to off and remove the jar from the base for pouring.
Warning:
Remove the jar from the base ONLY AFTER the machine has stopped running and the
blades have stopped rotating completely.
