Recommended installation
• Normal counter top at least 200 mm
• Stainless steel counter top at least 300 mm
Important notice
1. Ensure no bright source is aimed or reflected at the sensor from below.
2. Use fresh new liquid soap only and clean the soap container properly before each re-fill. Depo-
sits of old soap will lead to malfunction and jamming.
3. Do not dilute liquid soap unless concentrate and do not use soap containing abrasive.
4. Do not immerse the soap dispenser in water or clean it under running water. This will lead to
short circuit.
5. Should the dispenser be out of order and batteries have been replaced, do not attemt any
repair work. Call your dealer for professional assistance.
Caution:
batteries installed with incorrect polarity may cause malfunction.
Technical specifications:
Soap tank capacity – 800 ml
Battery type required – alkaline (1,5 V) AA size, Qty 6
Battery life estimated – 10 000 cycles or 1 year
Induction distance – 8-10 cm
Room temperature – 41-104°F, 5-40°C
Sensing delay time – 0,5 s
Applicable liquid – detergent, soap, shampoo, bath
dew and some other viscosity liquid
Operation mode – automatic sensor
