NOKEE-GO - USER MANUAL
18
Common error codes are defined in the following table:
Code number
Definition
21
Abnormal current
22
Throttle fault
23
Motor phase problem
24
Motor hall defect
25
Brake failed
30
Abnormal communication
7. SETTINGS
7.1 Clearance of single trip distance
The single trip reset setting can clear the single trip distance of the instrument. Short
press the “MODE” button to enter the setting state of single trip distance clearing. Short
press the “UP” button or “DOWN” button to clear the single distance (yes) and not clear
(no). Press the “Mode” button again to confirm the setting item, and save the settings
when returning to the main interface.
The single trip clearance setting interface
7.2 Unit settings
Unit setting can set the unit of speed and mileage displayed by the
instrument. The default setting is metric unit (Km/h, Km). When
in the setting interface, short press the “MODE” button to enter
the unit setting interface. Short press the “UP” or “DOWN” button
to switch between metric unit (km/h) and imperial unit (mph).
Press the “MODE” button again to confirm the setting item, save
and exit the unit setting interface at the same time.
Unit setting interface
