G-WEIKE G2, Manual, Page: 20 / 43

PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE
18
Ⅵ
.
Text Processing Settings
Marking Settings 2
* Red Light Preview and Marking
Red(F1) : Mark the center point of the pattern to be marked, but do not emit laser
light. It is used to indicate the processing area and facilitate the user to locate the work-
piece. This function is used for marking machines with red indicator light. Press F1 on
the keyboard to execute this command.
Mark(F2): Start processing. Press F2 on the keyboard to run this command.
1 2
Set the text size
Other settings (fill, text style, font, etc.)
Set processing parameters: speed, power, frequency
.
VII
. Parameter Table
The above parameters are for reference only, and can be adjusted according to the actual marking effect of the material.
Material
Black Aluminum
Stainless Steel
Brass
Leather
Non-transparent Plastic
Titanium Steel
Black Acrylic
Coated Metal
Speed(mm/s)
1000mm/s
1000mm/s
1000mm/s
1000mm/s
1000mm/s
1000mm/s
1000mm/s
1000mm/s
Power(%)
40
75
70
20
15
70
10
25
Frequency(Khz)
30
30
30
30
30
30
30
30
Line Spacing
0.1-0.001
0.1-0.001
0.1-0.001
0.1-0.001
0.1-0.001
0.1-0.001
0.1-0.001
0.1-0.001
image mode
RGOutlets
GOutlets
RGOutlets
GOutlets
GOutlets
GOutlets
RGOutlets
RGOutlets
Dotting time(ms)
0.1
0.5
0.2
0.2
0.1
0.2
0.1
0.1
Frequency(Khz)
30-80
30-80
30-80
30-80
30-80
30-80
30-80
30-80
Fixed Dpi
x:500 y:500
x:600 y:600
x:500 y:500
x:500 y:500
x:500 y:500
x:500 y:500
x:500 y:500
x:500 y:500
Vectorgraph
Black Aluminium
Stainless Steel
Brass
Leather
Non-transparent Plastic
Titanium Steel
Black Acrylic
Coated Metal
Picture Setting
Tips:The line spacing can be adjusted as needed, the smaller the line spacing, the longer the marking time, the more detailed the graphic.
The dotting time can be adjusted according to the brightness and shade of the picture, and the fluctuation within 0.1.
G2 Setting parameter