G-U ELTRAL K35, Assembly And Operating Instructions Manual

Page: 27 / 40

27
10.2013 | G28062 | Printed in Germany
7 Mounting the device
DANGER Incorrect use may cause injury to people and damage to prop-
erty
Please refer to the type label of the motor and the technical data in section
„4 Technical data (1 motor)“ on page 24 to ensure that your have select-
ed the right motor for your installation conditions.
œ º
Examine the delivered equipment immediately upon receipt and check it for possible
transport damage. Do not install the motor if it is damaged.
DANGER
Risk of crushing
During the automatic opening or closing of the window, push and pull
forces exceeding 350 N occur. These forces can crush limbs when reach-
ing between sash and frame, especially since the motor repeatedly tries to
complete the lift.
œ º
Keep children, disabled persons, and animals away from the window.
œ º
Do not reach between sash and frame when the motor is running.
œ º
In the case of a window sash installed below 2.50 m, secure all
crushing and shearing points to ensure that persons do not acciden-
tally reach into them. Observe VFF leaflet KB.01: Power-Operated
Windows.
œ º
A risk assessment must be carried out.
DANGER
Risk of injury
Motor-driven bottom-hung windows must always be equipped with a safety
catch to prevent injury caused by falling sashes.
Furthermore, there is a risk of injury when assembling the motor on a win-
dow that has already been installed if the sash opens suddenly.
œ º Always use appropriate safety devices such as stays to catch the
window.
œ º
The safety stay must be adapted to the opening width of the drive. To
avoid jamming, the opening width of the safety stay must exceed that
of the drive.
ATTENTION
Rsik of inappropriate assembly
The device must be assembled by trained and qualified persons only.
œ º
Once you have mounted the fittings, check that they are in perfect
working order.
œ º
Follow the enclosed assembly drawings exactly.
NOTE Type label
The type label is attached to the motor. With the motor installed, the type
label is not visible
œ º
Install the motor in a way that it is always accessible.
œ º
Follow the installation drawing which is enclosed in the mounting bracket kit or can be
º