background image

Manual 
 

www.g-tools.nl 

The symbol of the crossed-out wheelie bin on electrical and electronic equipment means that it mustn’t be 

removed in household waste. There are free collection points for the return of WEEE available nearby. Please 

inquire at your city or municipality about the addresses. You can also contact us regarding other options to return 

old equipment. By separate collection of WEEE, the reuse and recycling of old equipment are made possible and 

any negative impact on the environment and human health due to hazardous substances in old equipment is 

eliminated. You are responsible for the erasure of any private data which could still be stored on old equipment. 

Further information can be found on 

www.elektrogesetz.de

.

 

 
—— DEUTSCH —— 
 

Das Symbol des durchgestrichenen Mülleimers auf einem Elektro- oder Elektronikgerät besagt, dass dieses am 

Ende seiner Lebensdauer nicht im Hausmüll entsorgt werden darf. Zur kostenfreien Rückgabe stehen in Ihrer 

Nähe Sammelstellen für Elektro- und Elektronikaltgeräte zur Verfügung. Die Adressen erhalten Sie von Ihrer 

Stadt- bzw. Kommunalverwaltung. Sie können sich auch an uns wenden, um sich über weitere, von uns 

geschaffene Rückgabemöglichkeiten zu informieren. Durch die getrennte Sammlung von Elektro- und 

Elektronikaltgeräten soll die Wiederverwendung, die stoffliche Verwertung bzw. andere Formen der Verwertung 

von Altgeräten ermöglicht sowie negative Folgen bei der Entsorgung der in den Geräten möglicherweise 

enthaltenen gefährlichen Stoffe auf die Umwelt und die menschliche Gesundheit vermieden werden. Sie sind 

verantwortlich für die Löschung von möglicherweise auf den zu entsorgenden Altgeräten vorhandenen 

personenbezogenen Daten. Weitere Informationen finden Sie auch auf 

www.elektrogesetz.de

. 

 

                                                  

Summary of Contents for G-kit Bonanza











Reviews: