3
1. Important information
1. Always take out the 230V plug during maintenance or
service.
2. Make sure the G-kit is put in a safe and dry place.
3. The G-kit has to be connected to a grounded socket.
4. Do not touch the bulb with your hands. Always use a clean
cloth. The grease on your hands reduces the life time of the
bulb substantially.
5. Remove the ty-raps of the reflector before switching on the
light.
6. Take away the protection foil of all the panels before setting
up the cabinet.
7. Use a thermometer in the shadow to measure the
temperature correctly.
8. Make sure the ventilation holes are not blocked: keep a
minimum distance of 10 cm.
9. The room in which the G-kit is placed needs to be well
ventilated.
Disclaimer:
G-tools has no intention to promote the growing of any specific
tropical plant. Our products are not meant to encourage anyone to
break the law.
G-tools and our dealers cannot and will not be held responsible for
anyone who does.
G-tools advise their customers to check the national laws of their
country before ordering any products. We cannot guarantee that
well meant information would not be misused.
G-Tools Weesp, April 2010