10
PROGR A
PROGRAMMING INSTRUCTIONS
STR ION
Changing the Receiver Volume Level
1. Make sure the phone is in the program mode.
2. Enter 27
3. Enter the receiver volume level.
(1=Lowest 2=Medium 3=Highest)
4. Press the * (star) key to complete the entry; listen for one confirmation ‘beep’.
To Un-block or Un-restrict Certain Types of Calls
This section provides instructions on how to unblock or remove a time limit from a blocked or limited call
type.
1. Make sure the phone is in the program mode.
2. Enter the 4-digit rate band of the call type being made free
(see Call Type Description Table on
pg. 9)
3. Enter 0000 0000 255 01 0008 *
4. Press the * (star) key to complete the entry; listen for one confirmation ‘beep’.
Programming an Access Code for PBX Phone Systems
The following procedure shows the steps necessary to allow the Smart Coinless Bell Phone to work on a
PBX phone system. The phone will automatically dial the PBX access code before the users destination
number.
1. Make sure the phone is in the program mode.
2. Enter 24
3. Enter the PBX access code.
4. Press the * (star) key to complete the entry; listen for one confirmation ‘beep’.
**The Smart Bell Style Coinless Phone also allows up to 9 different speed dial numbers but this feature
must be programmed into the phone via download from G-TEL. This feature is free at the time of
purchase. Charges may apply after the time of purchase.**