G-Tech Pro Competition User Manual Download Page 58

Page: 58 / 180

Acceleration Runs

G-TECH / Pro Competition User Guide, Release 3.1

•

View Run Again

and return to the Run Viewing Menu

For now, let’s just discard these results, since we are just get-
ting familiar with the G-tech. We will come back to the other
choices later in this manual.

Discarding Run Results

Discarding a run causes you to lose all the information about
the run forever.

Therefore, when you select “Discard this run” from the Run
Save Menu, the G-tech requires that you confirm this deci-
sion (Figure 22).

Figure 22: Confirmation before discarding run

Press

to confirm. The G-tech will discard all the results,

and return to the main window in

Drag Strip Mode

, the G-

Window.

Summary of Contents for Pro Competition





















































































































































































Search results

Summary of Contents for Pro Competition

Reviews:

Brands by name

Popular brands

G-Tech Pro Competition, User Manual

Search results

Summary of Contents for Pro Competition

Reviews:

Brands by name

Popular brands