G-Tech GL-6000L Series, Service Manual

Page: 10 / 36

10
2.4 Key Functions
Key Description
1) It sets the current weight “0” within a certain degree of the
maximum weight.
2) When the ‘ Zero ’ Key is long pressed, the direction of
LCD display is reversed.
1) It is used to set / release tare function.
2) When the Key is long pressed, you can adjust the upper
Limit / lower limit of value.
1) When the ‘ PRINT ’ Key is pressed after placing an object on the platform,
the current weight is transmitted via communication port.
2) When the ‘
PRINT ’ Key is pressed without an object on
the platform, the total amount of weight is printed out.
(when printer output is used)
1) When pressed short, measurement unit changes.
2) When pressed long, the upper limit/lower limit function is
turned ‘ ON/OFF ’.
1) It turns ‘ ON/OFF ’ the power.