G-Tech GL-6000L Series, Service Manual, Page: 17 / 36

17
③ Backlight Time Setting
Type Initial Value Setting Value
Description
5s
It sets backlight auto off time..
If the scale is stable for the preset time, the
backlight is automatically turned off.
Notice : It is set 20s, the backlight is turned off after
20 seconds.
10s
●
20s
30s
40s
50s
60s
on
off
④ Communication & Printer Output Setting
Type Initial Value Setting Value Description
disable Not used
It sets Communication
& Printer Output Mode.
stre-s Serial (Stream)
● comm-s Serial (Command)
stab-s
Serial (when the
weight is stable)
keyz-s
Serial (when the
ZERO Key is pressed)
stab-p
Printer (when the
weight is stable)
keyz-p
Printer (when the
ZERO Key is pressed)
⑤ Baud Rate Setting
Type Initial Value Setting Value
Description
br-24
It sets baud rate.
Notice : It communicates in 9600bps when setting
br-96.
br-48
●
br-96
br-192
⑥ Parity Bit Setting
Type Initial Value Setting Value Description
● n81 8bits,Non Parity
It sets Parity Bit.
e81 8 bits, Even parity
o8 8 bits, Odd parity