Page 4
Sound Clip Module - Hardware Specifications
Board Revision “F”
Mechanical
Enclosure
3.0” X 1.8” X 1.0”
3D printed Black PETG
Snap On Cover
PCB
2.2” X 1.2” X 0.7”
Wiring
User Connections: Screw Terminals, 22 AWG, tinned leads
Electrical
Power Input Terminals (+,-)
7VDC min to 25VDC max
No polarity (despite the label). Will operate from track power that reverses polarity.
Speaker Output Terminals (Spk)
One 8 Ohm speaker
Switch contact Input Terminals (S,C)
Momentary switch closure to single play sound
Closed contact or jumper for continuous looping of sound
Motion Detector (PIR) Input Terminals (C,P,5)
(See connections on previous pages)
Range: 3 to 5 meters
Delay: at least 2 seconds after no motion is detected
Won’t retrigger while sound is playing
Volume Switch
4 position DIP switch
Warranty - 12 months from date of purchase. Post warranty repairs can be made for a modest fee.
