How to use the Roller Shutter Opener
Using your mobile or landline phone, dial the simcard number. You will hear 2 ring tones.
The unit will then answer the call. Once the call is open you can then use the keypad on
your phone to operate the device.
Pressing key 1 will cause relay 1 to pulse
Pressing key 2 will cause relay 2 to pulse
Pushing key number 1 or 2 again will stop the command and the shutter will hold in a
stationery position.
We recommend connecting relay 1 to OPEN/UP and relay 2 to CLOSE/DOWN on your
roller shutter control board.
When you press 1 you will here a fast dialling tone.
When you press 2 you will hear a slower dialling tone.
Please view the diagram on page 6 for wiring information.
SIGNAL STRENGTH
To help make sure that you place the unit in a suitable position you can text the unit to see
how much signal strength the dialler is receiving by texting the command
#
SIGNAL
The unit will perform a test on the signal strength.
You will receive a text telling you a signal strength score between 0 up to 30 we strongly
recommend that you place the unit where you can receive a signal strength score of at
least 10.
You will find that with a score less then 10 the unit will be unreliable and is n o t suitable.
Factory Reset
To perform a quick factory reset which will delete all stored numbers please use the text
command
#
RESET
The
red
LED will flash 6 times to indicate that the reset has been successful.
QUICK REFERENCE
OPERATION
ACKNOWLEDGE
#
s
tore
*
number
*
STORE NUMBER
NUMBER STORED
#
delete
*
number
*
DELETE NUMBER
NUMBER STORED
#
RESET
FACTORY RESET
RED LED FLASH x6
#
SIGNAL
SIGNAL STRENGTH
SCORE BETWEEN 1-30
Page 5
