Page 4
How to programme contact numbers
After inserting your simcard in to the GSM module turn the unit on and wait until you see
the
GREEN
LED is on. This will indicate that you have a mobile signal and the unit is
ready for use.
You will now need to send a text message with the contact numbers, (maximum 3 contact
numbers).
NOTE
- To avoid confusion we have colour coded the (
HASH
) and the (
EQUALS
)
Symbols. Additionally, where we have put a ‘phone number’ in the manual this
will need to be your own contact number.
Example: (
HASH
) (1,2 or 3) (
EQUALS
) (phone number) (
HASH
)
#
1
=
07123456789
#
Then send this as a text message for contact no: 1
#
2
=
07123456789
#
Then send this as a text message for contact no: 2
#
3
=
07123456789
#
Then send this as a text message for contact no: 3
If you wish to cancel a number please follow this example
Example: (
HASH
) (1,2 or 3) (
EQUALS
) (DELETE) (
HASH
)
#
1
=
DELETE
#
Send this as a text to the simcard number in your unit.
PLEASE NOTE
Please only send one text message at a time and wait for the GSM detector to send back
the text acknowledgement
‘number stored’
before you try to add another number.
Below is a note pad to help you remember the numbers that you have saved to your unit in
the event you need to modify or delete them in the future.
#
1
=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#
#
2
=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#
#
3
=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#
