Page 5
The Sensors
The GSM Alarm Pro 20 has the ability to pair up to 20 sensors. These sensors can be
programmed with their own unique location code so the end user will know exactly which
sensor has been triggered.
The sensors and key fobs are easily paired by using the colour touch screen display on the
board.
Pairing the Sensors
1. Touch the screen
2. Press the
RED
“SENSOR OPTION”
3. Choose a location 1-20 to store the sensor using the + and - icons.
4. Touch the “SELECT LOCATION” - a prompt will appear saying “ACTIVATE SENSOR
NOW”
5. Activate your sensor
6. Touch “SAVE-YES” - You will hear 3 beeps to confirm
IMPORTANT - PLEASE READ
Once a sensor has been stored to a location, it cannot be stored to another location without
it being unpaired using a reset.
Pairing the Key Fobs
● Press the
GREEN
key option
● It will show 3 positions and have an X or - symbol - this shows whether a keyfob is
paired to it
● Choose a location from 1-3
● You will then get a prompt to “PRESS KEY FOB A”
● Press the “A” ONLY on your key fob
● This will be followed by a beep to signal it has been paired and stored to that location
Delete Sensors / key fob
To delete the sensors or key fobs, touch the
YELLOW
RESET command. It will ask you
whether you want to remove ALL sensors or ALL key fobs.
SIM Active Function
Our GSM Auto Dialler comes with a SIM Active function meaning that it will send a
message every six weeks to a preprogrammed number we at GSM Activate own to prevent
the SIM card being shut down due to inactivity.
www.gsm-activate.co.uk
- 01273462380 - [email protected]
