Programming Dial to Open Gate Entry (WHL LIST) (Caller ID)
You can open the gate direct from a mobile phone or landline by calling the simcard number.
Once you call the number the GSM Intercom will reject the call, but will take the command to
open the gate.
We have a caller ID function controlled by dipswitch 6. If this is set to ON only the numbers
stored in the intercom will be accepted to open the gate. If it is set to OFF there is no caller ID
security and any caller can open the gate.
To program a number to the caller ID (whl) list you will need to send a text message code
#
WHL
#
NUMBER
#
To delete the number send a text message code
#
WHL
*
NUMBER
#
Please note the only difference is the
star
not
hash
after WHL.
Example
#
WHL
#
07713099514
#
-
To store you mobile number.
Example
#
WHL
*
07713099514
#
-
To delete mobile number.
If the code is accepted the unit will reply “WHL number stored”
If the code is accepted the unit will reply “PRI number stored” or “DIV number stored”
By texting
#RESET
you will delete all primary and divert numbers plus your dial to open (whl)
numbers.
NOTE - It will not affect keypad codes.
To open the gate permanently from your phone you can send a text
#
OPEN - This will hold relay 1 on.
To close the gate just ring the simcard number, this will reset relay 1 and the gate will close.
Relay Pulse Time
The default pulse time for each relay is 2 seconds. You can increase this to 10 seconds for
each relay via dipswitches 3 and 4. Please see dipswitch settings on page 11.
Page 7
