Progamming Intercom Call Button Entry
On the front panel there are 4 intercom call buttons, pressing the relative call button will dial
the primary and divert number relating to the button number. To programme these numbers
you will need to send a text message code which will store the number you want to use in
either the primary or divert position for each call button.
Example -
Send a text message to the sim card. -
#
PRI=1
#
07713099514
#
- This stores the mobile phone number as primary number for call
button 1
#
DIV=4
#
07713099514
#
- This stores the mobile phone number as divert number for call
button 4
To delete a stored number use location followed by
star
(see table below)
#
PRI=1
*
or
#
DIV=1
*
Note there is a maximum of 15 digits per phone number stored.
If the code is accepted the unit will reply “PRI number stored” or “DIV number stored”
By texting
#RESET
you will delete all primary and divert numbers plus your dial to open (whl)
numbers.
NOTE - It will not affect keypad codes.
Page 5
