background image

3

LI0063 – Revision 29 May 2015

Contents

Introduction .................................................................................. 4

The Scope of this Manual ........................................................................... 4

Brief Description ........................................................................................ 4

General Handling Rules for Flush-mount Microphones .................................... 5

Delivered items and Accessories ....................................................... 6

Delivered Items ......................................................................................... 6

Optional Accessories – Mounting .................................................................. 7

Optional Accessories – Calibration ................................................................ 7

Mounting and Removal ................................................................... 8

General Information .................................................................................... 8

Mounting without Adapters ......................................................................... 8

Mounting with Adapters.............................................................................. 8

Removal of 1/2 inch and 1/4 inch Flush-mount Microphone ......................... 12

Powering & Connection – CCP ........................................................ 13

General Information .................................................................................. 13

Connection .............................................................................................. 13

Extension Cables...................................................................................... 13

Calibration ................................................................................. 15

Periodical Calibration ................................................................................ 15

How to Perform Sensitivity Calibration ........................................................ 15

How to Perform Frequency Calibration ........................................................ 15

Specifications ............................................................................. 16

Calibration, Warranty and Repair .................................................... 16

Calibration ............................................................................................... 16

Warranty ................................................................................................. 16

Service and Repairs .................................................................................. 16

Summary of Contents for 47AD


















Reviews: