7
LI0152 – 4 July 2017
Removing the Preamplifier
As delivered, the microphone set is mounted inside the housing. To attach the cable, you must
remove the top, remove the microphone and pull out the preamplifier.
1. Unscrew the top cone from the housing.
2. Set it aside and ensure that it is protected from dirt and moisture.
3. Remove the microphone from the preamplifier and set it aside. Ensure that it is protected from
dirt and moisture.
4. Push at the top of the preamplifier to make it slide down through the tube.
1
3
2
4
Fig. 3.
Removing the top cone and releasing the preamplifier.
