34
2. Select “Search” in the unfolded menu.
3. The search box will appear. Enter the name or path of the file or directory you wish to search. The
basic path of the file/directory you wish to search is the current path (.). Tap the “Search” button to select
a path you wish to search in.
4. Tap the “OK” button and the searched results window will appear.
5. Confirm the path of the searched file or directory in the searched results window, and tap the “Close”
button.
Note
When entering the name of a file or directory in the search box, use “*” (wild card) to enable extended
search. For example, if you would like to locate “yopy.txt ”, type “y*” in order to search all files or
directories starting with “y”, or “*.txt ” to search all files with the extension “txt”.
Synchronizing
The Sync command is used for the maintenance of your YOPY’s file system. In order to maintain the
original state of your file system, you must regularly run the Sync command.
Normally, data are written first in a memory called the buffer cache before saved in the storage disk. The
physical load of your data into the disk is delayed after being written to the buffer cache, until the
following operation.
- When your system requires buffer for the operation of another process
- When the Sync command is executed
That is, when the Sync command is executed, your system empties those buffers and stores all data into
your disk.
For executing Sync in the File Manager, select “Command” in the menu bar and then select “Sync”.
Changing file/directory properties
Sets the general properties and permission of a file or directory.
1. Select a file/directory.
2. Select “Edit” in the menu bar.
3. Select “Properties”.
4. The properties box composed of two tabs, will appear.
Changing file/directory name
You may change your file/directory name in the file/directory properties box. Move your cursor to the
name input box by tapping it with your Stylus Pen, and the Screen Keyboard will appear automatically.
Summary of Contents for YOPY
Page 1: ...1 User Guide ...
