![background image](http://html1.mh-extra.com/html/g-lites/arch-90-90x3w/arch-90-90x3w_user-manual_3075741017.webp)
3. Please check the light if they are deformation, inside parts is
broken, become wet etc will lead the loose contact.
14
. CLEANING AND MAINTENANCE
■
1. In order to ensure the projector could work normally. It should be
kept clean always .The lens should also be regularly cleaned to
maintain an optimum light output. Do not use any type of solvent on
lens. It will damage the projector.
■
2. Suggestion: The continue usage of the light don't exceed 4 hours. Or
it will shorter the usage of the lamp. Please use the alternative
operation to solve this problem.
■
3. Please disconnect the power supply when begin to maintenance take
down the light. Please let the parts cool down 10 minute at least
then begin to install.
■
4. Please inspect the lens or other moving parts timing and keep them
clear and static. If find anything damaged or looseness must change
a lamp or fix the lamp in order to avoid the accident.
15. DUTY EXONERATIVE AND COPYRIGHT PROTECTION
◎
Any products broken that didn't according to the instruction is not
guarantee to keep it in good repair.
◎
The commentary for all the instruction belongs to the supplier in final.
◎
No authorize can't copy.
17
Summary of Contents for ARCH 90 90X3W
Page 1: ...1 ...
Page 5: ...4 OPERATION PANEL 5 DIMENSIONAL DRAWINGS 5 ...
Page 6: ...6 PHOTOMETRIC DATA 6 ...
Page 13: ...11 CIRCUIT CONNECTING DIAGRAM 13 ...