g-lites 600SZ, User Manual

Page: 10 / 24

www.g-lites.com 10
Lamp features
HMI series lamp is a high-voltage recharge lamp. Always be careful when
handling the lamp before operating. Please read the following information
carefully. Manufacture will not be responsible for misuse or incorrect operation.
Warnings:
Warning 1:
Disconnect the power supply if there are no lamps fixed inside the fixture. Or it
will melt down the fixture.
Warning 2:
Disconnect the power supply before replacing the fixtures.
Warning 3:
When the lamp is operating, its temperature will be extremely high. The feature of
the recharge lamp can not work under the interruption power supply. Therefore,
please let the lamp cool down completely (Approx 15 minutes at least).Then it’s
ready to operate again. Other wise, it will lead to high tension, short circuit or
electric discharge. It may cause the part of the control board to burn down.
Warning 4:
All the lamps have its usage life, please inspect the lamp timing and ensure the
lamp's usage life not to exceed the rated life span; otherwise, it may result in
damaged, broken, deformation or blacken. If the lamp is broken, the impact will
damage the moving head's spot system. The electric parts on the circuit board
may cause cracks by the high voltage. The hot lamp fragments may injure
people, explode, or set on fire.