Page 21
preset position corresponds.
Clear Preset
：
Input preset points, click Remove button, remove the preset
。
Picture 3.11 Preset Settings
2
）
Preset Point Calls
In Picture 3.10, click Page Shift button, enter PTZ control interface as shown in Picture 3.12. In
the input blank, write the preset points, then click Preset button, PTZ turn to the corresponding
preset point.
Picture 3.12 PTZ Control
2
、
、
、
、
Cruise between Points
Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on
the line
1
）
Cruise Between Points Settings
Cruise lines is connected by multiple preset points, setting procedure is as follows:
Step1: In Picture 3.10, the Direction key will turn PTZ to designated location , click Settings
button to enter Picture 3.13,
Preset button
Preset point input blank
Value input blank
