G-Lab MD3110, Instruction Manual

Page: 10 / 25

- 9 -
SETTING DATE AND TIME
(A) When new batteries are installed
1. “YEAR” will blink on the display.
2. Press or key to set the current Year.
3. Press key to confirm and then "MONTH" will start to blink.
4. Press or key to set the current Month.
5. Press key to confirm and then "DAY" will start to blink.
6. Press or key to set the current Day.
7. Press key to confirm and then "HOUR" will start to blink.
8. Press or key to set the current Hour.
9. Press key to confirm and then "MINUTE" will start to blink.
10. Press or key to set the current Minute.
11. Press key to confirm. Date and time setting is completed.
12. The device returns to Clock mode. Date and time appear on
the display.
(B) When device is in Clock Mode
1. Press or key to Standby Mode.
2. Press and hold key for about 5 seconds until "YEAR" blinks
on the display.
3. Follow the same procedure above to set the date and time.
Clock Mode Standby Mode