Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: 886-2-8751 0668
9
Prepare to use your Bluetooth headset.
1. Charging and battery time
1) Before you can use your headset, you need to fully charge the headset.
2) The headset can be on or off while charging.
3) If left unused a fully charged battery will discharge itself over time. It is
better not leave the battery connected to a charger longer than 3 days,
since overcharging might shorten its lifetime.
2. To charge the headset, please follow this guide:
1) Connect the adapter into an electrical outlet.
2) Plug the adapter’s connector into charging port.
3) While charging, the red indicator light will stay on and remains light until
the charging is completed. When the charging is completed, the
indicators are off i.e. power off.
4) Charging time is about 1 – 2 hours.
5) You can now take the adapter’s connector out from the headset and
disconnect the adapter from the electrical outlet.
3. Pairing the headset to the phone
Before you use your headset for the first time, you must pair the headset to a
Bluetooth mobile phone. The Bluetooth connection between the headset and
your phone can be established by setting up a paired link. With a paired link, the
phone records the headset’s ID, and process with future use. Please use the
following guide.
Before you can pair your headset you need to put it into pairing mode.
Note: Pairing must be done every time while the headset establishes a link with a
different Bluetooth mobile phone.
Pairing mode can only be entered while reset the Gg01. During pairing, it is
recommended that the headset and phone distance is as close as possible-with
no solid objects in between.
Note: Full charge your Gg01 for at least 4 hours before you use it the first time.
