Fyne Audio F700 Series, Information Manual, Page: 4 / 12

4
1 INTRODUCTION
Thank you for choosing Fyne Audio loudspeakers, proudly designed by our experienced engineers and manufactured to
exacting standards by our craftsmen in Scotland. We believe they will give you many years of listening pleasure.
2 SAFETY
For safety reasons, and to ensure you achieve the best performance possible, please fully read this
document before installing these loudspeakers.
To prevent injury or damage when unpacking the loudspeakers, please do
not
use the protective bag to lift
them in case it tears. If possible retain packaging for future use.
The spikes are very sharp - take care to avoid personal injury.
These speakers must always be connected to a suitable amplifier and never to a mains supply.
Ensure your amplifier is switched off before making connections, to avoid damage.
3 STAND MOUNTING
For optimum performance, we strongly recommend the use of Fyne Audio’s dedicated FS8 loudspeaker stand with
the F700 & F701. Instructions on how to affix the loudspeaker to the stand are included with the stand, and should be
followed carefully, both for reasons of safety and to ensure you achieve the best sound possible.
If you decide however to make use of a third party stand design, it should be rigid and well damped. The centre of the
drive unit should be approximately at ear height when seated.
To prevent both personal injury and damage to the loudspeaker, ensure the stand is stable and
capable of supporting the weight of the loudspeaker.
NOTE: Should you choose to use your loudspeaker without a stand, protect the surface by attaching the 4 self adhesive
feet provided.