Fyne Audio F1-5, Essential Information

Page: 16 / 18

15
F1-5
System type 2 way, downwards firing port,
with BassTrax
TM
Tractrix diffuser*
Recommended amplifier 30 - 100
power (Watt RMS)
Peak power handling (Watt peak) 200
Continuous power 50
handling (Watt RMS)
Sensitivity (2.83 Volt @ 1m) 87dB
Nominal impedance 8 Ohm
Frequency response 48Hz - 38kHz
(-6dB typical in room)
Drive unit complement 1 x 125mm IsoFlareTM point source driver,
multi-fibre bass/ midrange cone,
FyneFlute
TM
surround with 19mm magnesium
dome compression tweeter, neodymium
magnet system
Crossover frequency 1.9kHz
Crossover type Single wired passive low loss, 2nd order low pass,
1st order high pass. Deep Cryogenically Treated
System adjustments Presence (2.5kHz - 5.0kHz) +/- 3dB
Dimensions - HxWxD 321 x 186 x 289mm
(12.6 x 7.3 x 11.4”)
Cabinet construction Pressed high density birch ply
* Patent applied for
F1-8
System type 2 way, downwards firing port,
with BassTrax
TM
Tractrix diffuser*
Recommended amplifier 30 - 180
power (Watt RMS)
Peak power handling (Watt peak) 360
Continuous power 90
handling (Watt RMS)
Sensitivity (2.83 Volt @ 1m) 91dB
Nominal impedance 8 Ohm
Frequency response 33Hz - 34kHz
(-6dB typical in room)
Drive unit complement 1 x 200mm IsoFlare
TM
point source driver, multi-fibre
bass/ midrange cone, FyneFlute
TM
surround with
25mm magnesium dome compression tweeter,
ferrite magnet system
Crossover frequency 1.8kHz
Crossover type Bi-wired passive low loss, 2nd order low pass,
1st order high pass. Deep Cryogenically Treated
System adjustments Presence (2.5kHz - 5.0kHz) +/- 3dB
Dimensions - HxWxD 470 x 280 x 441mm
(18.5 x 11.0 x 17.4”)
Cabinet construction Pressed high density birch ply, internally braced
* Patent applied for