Connect carbon
rod and
carbon
rod adaptor with
welding gun
.
Carbon
rod turning
in
clockwise to heat up
the stretched
panel
F007+F009+F020
D
、
Carbon
rod Hea ti ng
3
、
Operation
Set correct amperage
.
Set correct time
.
Remark
:
1
、
Setting amperage too high or time too long can cause workpiece surface (vehicle
body)damage .
Please weld other workpieces for practice before actual operations
.
2
、
Setting correct amperage and time according to the workpiece thickness
.
3
、
Continuing another operation is available after this procedure finished .If not, please
shut off the main power supply and switch off
the unit
.
.
P a g e . 1 4
%
Connect negative outside wire
to a clean,paint-free location
on metal workpiece,as close to
welding area as possible.
Cool the surface with a wet
rag or compressed air.
