The shortwave infrared curing lamp is divided into 3 parts (a base, a frame and a cassette)
1) Installation of the base:
a. Open the packing of the base.
b. Install the four wheels on the base and tighten up the screws.
Usually, the wheels with brakes are mounted on the rear of the base.
2) Installation of the frame:
a. Open the packing of the frame.
b. Put the column onto the top of the base, line up the screw holes and tighten up
with screws.
3) Installation of the cassette:
a. Open the packaging of cassette with care.
b. Connect cassette with holder and tighten up by screws.
c. Connect control wires and adjust the angle of the lamps.
Page 3
3. Installation
1
2
5
6
8
9
3
4
7
1. Main switch
2. Control box
3. Cassette
4. Cassette
5. Holder
6. Column
7. Base
8. Pillar base
9. Caster
