3. Installation
The shortwave infrared curing lamp is divided into 3 parts (a base, a frame and a cassette)
1) Installation of the base:
a. Open the packaging of the base.
b. Install the four wheels on the base respectively and tighten up the screws.
Usually, the wheels with brakes are mounted on the rear of the base.
2) Installation of the frame:
a. Open the packaging of the frame.
b. Put the frame vertically onto the top of the base, line up the screw holes and
tighten up with screws.
c. Connect the pull rod with the frame for supporting the cassette.
d. Connect the lifter with the frame for controlling the up and down movement of
the cassette.
3) Installation of the cassette:
a. Open the packaging of the cassette with care.
b. Connect cassette with pull rod and tighten up with screws.
c. Connect control wires and adjust the angle of the cassette.
Page 3