INSTALL NOTE:
A-NK6
LANDSCAPE & ARCHITECTURAL LIGHTING
| Learn more. Visit fxl.com
3. Product Installation (cont.)
2. Run conduit and/or wiring (code dependent)
to the ideal “knockout(s)” in the construction
sleeve.
3. Use a tool of choice to forcefully remove the
knockout.
4. Connect the conduit/wire runs to the sleeve
with couplings of choice (1/2"-14 NPT).
5. Attach the sleeve cover to protect the interior
during wall finishing using included fasteners.
6. Remove the sleeve cover to resume installation.
7. Connect wiring from housing assembly to the
incoming power lines using the wiring diagram
(see previous section) and approved wire
connectors.
8. Insert the complete housing assembly into the
construction sleeve.
9. Place the housing inside the sleeve and fasten
the screws through the center slots on the left
and right sides. Before fully tightening, rotate
the housing according to the level for ideal
installation.
