- 13 -
z
Release the brake lever.
WARNING:
The blade will continue to rotate for a few seconds after the engine has stopped.
Disconnect the spark plug cap if the lawn mower is to be left unattended.
6. MAINTENANCE
IMPORTANT
: Regular, careful maintenance is essential for keeping the safety level and original
performance of the machine unchanged in time.
z
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular
maintenance is essential for safety and performance.
z
Never store the equipment with fuel in the tank inside a building where vapor may reach a flame or a
spark or a source of extreme heat.
z
Allow the engine to cool before storing in an enclosed space.
z
To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment and fuel storage
area free of grass, leaves, or excessive grease. Do not leave containers with grass cuttings in rooms.
z
For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced
and not repaired. Use genuine spare parts (blades should always bear the symbol). Parts that are not
of the same quality can damage the equipment and be dangerous for your safety.
z
If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.
z
Wear strong work gloves when removing and reassembling the blade.
z
Check the blade’s balance after sharpening.
z
Check the self-closing guard and grass-catcher frequently for wear and deterioration.
z
Whenever the machine is to be handled, transported or tilted you must:
-
Wear strong working gloves.
-
Grasp the machine at the points that offer a safe grip, taking account of the weight and its
distribution.
Blade Inspection
z
Tilt the lawn mower to the right, so the air cleaner side is up. This will help to prevent fuel leakage and
hard starting.
z
Inspect the blade for damage, cracks and excessive rust or corrosion.
A dull blade can be sharpened, but a blade that is excessively worn, bent, cracked, or otherwise
damaged must be replaced.
z
A torque wrench must always be used when installing the blade.
Check that the blade bolts are tight.
Removal and installation
If you remove the blade for sharpening or replacement, you will need a torque wrench for installation.
BRAKE LEVER
