- 6 -
-
To remove and emptying the grass catcher.
-
After hitting a foreign object, stop the engine and check thoroughly the mower in order to see if it
is damage. Bring the mower in an agreed service station to do the repairing if necessary.
WARNING:
After you stopped the engine the blade is still in motion during a few seconds.
-
If the mower vibrates in an abnormal way, find the reasons why, and take your mower to an
agreed service station.
-
Check regularly that bolts, nuts and screw are secularly tightening for a safe use of the mower.
z
GASOLINE IS HIGHLY INFLAMMABLE
-
Keep gasoline in a jerry can specially made for this purpose.
-
Fill up the tank with a funnel, do the operation outside. Do not smoke. Do not use mobile phone.
-
Fill up with gasoline and oil before starting the engine. Never open the cap of the fuel tank to add
gasoline while the engine is running or still hot.
-
Do not start the engine if there is some gasoline spread around, take the mower away from the
one where gasoline have been split and avoid any contact from a hot source as long as the split
gasoline is completely evaporated.
-
Tighten the fuel tank cap and close tightly the jerry can cap.
2. ASSEMBLY
Unpacking
Remove the lawn mower from carton and check thoroughly for additional loose parts.
Handle setup and height adjustment
Take out the handle and screw the handle parts with the four screws and knobs. Put the recoil starter on
the right of the handle and fix the cable with the plastic collar.
Introduce the rope of the recoil starter handle on its support guide rope.
If you want to adjust the height of the handle bar, you can choose
“L”
or
“H”
two holes in left-right bracket
to fix the handle bar with screws and knobs.
The
“H”
hole is high position of the handle bar, and the
“L”
hole is low position of the handle bar.
KNOB
SCREW