7
10
From the
Tools
menu, select “
Check for
Firmware Updates…
”
8
A notification message should appear as
follows to update the PFx Brick.
9
Click “
Yes
” to reinstall the firmware.
The firmware update will proceed with
transferring and then restarting the PFx
Brick…
The PFx App will remain in Recovery
mode after the update has finished.
11
Unplug the speaker from IR sensor
connector.
Unplug the USB cable.
12
Plug the USB cable back into the PFx Brick.
Click the
Refresh
button on the PFx App.
You can verify the firmware version number from
the
Settings
tab of the PFx App.
©
2018 Fx Bricks Inc. Rev A
Service / Recovery Mode
Carefully reinstall the IR sensor and 1 x 2
transparent cover brick.
Ensure the IR sensor is plugged into the
connector with orientation shown.
