FLATLINE VAN CO • [email protected] • 888-667-5576
6
3.
ONCE YOU’VE DETERMINED THE APPROPRIATE MOUNTING LOCATIONS,
ATTACH THE
MOUNT POSTS
TO YOUR
REAR PLATFORM
USING THE SUPPLIED
3/8-16 X 1 FLANGED HEX HEAD SCREWS
,
3/8 FLAT WASHERS
, AND
3/8-16
FLANGED NYLON INSERT LOCKNUTS
AS SHOWN IN THE FIGURE TO THE
RIGHT.
NOTE-
IN EVERY ORIENTATION OF MOUNTING IT IS IMPORTANT TO
ENSURE YOU ARE USING AT LEAST THREE FASTENERS TO MOUNT AS
SHOWN IN THE FIGURE BELOW. WHEN MOUNT POSTS ARE IN THE
UPRIGHT POSITION THERE SHOULD ALWAYS BE A FASTENER IN THE
TOP HOLE. FAILURE TO DO THIS CAN RESULT IN A MALFUNCTION OF
THE MOUNT POST.
3/8 SCREW FLAT WASHER
3/8-16 FLANGED NYLON
INSERT LOCKNUT
3/8-16 X 1 FLANGED HEX
HEAD SCREW
