This template is a rough guide only. You should ensure correct marking of your
enclosure before drilling. You use this template at your own risk.
Pedal Parts Ltd can accept no responsibility for incorrect drilling of enclosures.
PedalParts.co.uk
Drilling template
No Switch
Hammond 1590B
60 x 111 x 31mm
It’s a good idea to drill the
pot and toggle switch holes
1mm bigger if you’re
board-mounting them.
Wiggle room = good!
Recommended drill sizes:
Pots
7mm
Jacks
10mm
Footswitch
12mm
DC Socket
12mm
Toggle Switch
6mm
32mm
21mm
