The only critical measurement for drilling is the 60mm gap between the footswitch
centres. Everything else can be moved around to suit, as long as your jacks clear
the footswitches and pots.
This template is a rough guide only. You should ensure correct marking of your
enclosure before drilling. You use this template at your own risk.
Pedal Parts Ltd can accept no responsibility for incorrect drilling of enclosures.
FuzzDog.co.uk
Drilling template
Hammond 1590B
60 x 111 x 31mm
It’s a good idea to drill the pot holes 1mm
bigger if you’re board-mounting them.
Wiggle room = good!
Recommended drill sizes:
Pots
7mm
Jacks
10mm
Footswitch
12mm
DC Socket
12mm
Toggle Switch
6mm
60mm
