TIGHTENING THE CLAMP
For best tightening results, tightening all three bolts in stages. Tighten the first bolt, then the
second bolt and then the 3rd. Repeat this process until all three clamps are very snug and tight. It
is essential that the t-bar is snug with the headset and a gap does NOT exist.
TIGHTENING THE REAR LEAF SPRING
Be sure that the bolts that attached the leaf spring to the body are tightening to strong pressure.
Maintenance Tips
It is the responsibility of the owner or guardian to periodically inspect the wheels, nuts, T-bar, leaf
spring and bearings for wear and tear, and check for proper tightness. Always make sure to tighten
bolts and nuts before you ride.
Eventually wheels, self locking nuts and bearings wear and need replacement. The life of these
components depends on the kind of riding done. Lots of braking will wear out wheels and riding
in dirty or wet conditions will prematurely shorten bearing and fasteners life. Worn wheels and
bearings are considered normal wear-and-tear and are not covered by the Nextsport Limited
Warranty. Wheels other than genuine Fuzion wheels may not be compatible with your scooter.
Always use genuine Fuzion replacement parts.
CLEANING YOUR SCOOTER
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they
may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they
may damage or dissolve the plastic components or soften the decals or decal adhesives.
ADJUSTMENT TIPS
4
ALWAYS, BEFORE YOU RIDE
WARNING: ALWAYS INSPECT SCOOTER PRIOR TO RIDING.
Proper inspection and
maintenance of your scooter can reduce the risk of injury. Check all fasteners before
every ride. Always inspect your scooter before riding, and maintain it regularly. Replace
worn or broken parts immediately. Adults must assist children in the assembly and initial
adjustment procedure.
WARNING: REGARDING USEE OF NON-NEXTSPORT PRODUCTS WITH YOUR FUZION
SCOOTER.
Your scooter has been built to Nextsport’s design specifications. All the original
equipment supplied at the time of sale was selected on the basis of compatibility with
the frame, wheels, pivots, and all other parts. Certain after-market products may or may
not be compatible with your FUZION scooter. Call Nextsport’s customer service prior to
modifying or replacing any component with non-factory specified parts.
WARNING: CHECK ALL LOCAL LAWS REGARDING SCOOTER USE.
Check all local laws and regulations to see where and how you may use your FUZION
scooter legally. In many states and local areas scooter riders are required BY LAW to wear
a helmet. Check and obey local laws and regulations regarding laws governing helmet use
and scooter operation in your area.
WARNING: BRAKE MECHANISM WILL GET HOT FROM CONTINUOUS USE.
Do not touch
after braking.
WARNING: REMEMBER TO ALWAYS WEAR PROTECTIVE GEAR.
This includes a helmet,
elbow and knee pads.
RIDING TIPS
Please make sure to watch the
following video before you use
your JumpX. It gives instruction
and tips on how to ride the product.
www.fuzionscooter.com/jumpxridingtips
JumpX
owner’s manual
5
JumpX
owner’s manual
RIDER’S CHECK LIST
Remember to check before riding:
Brake Check
Tight clamp
Tighten rear leaf spring bolts
Wheels and axles are tight & secure
Wheels spin freely
Safety gear in place
