Original Bedienungsanleitung FUXTEC FX-RT226_rev02
33
22.
SAFETY RULES & PRECAUTIONS
Proper safety precautions must be observed. Like all power equipment this unit must be
handled carefully. DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER.Follow these
general rules. Do not permit others to use this machine unless they are thoroughly
responsible and have read, and understand the machine manual and are trained in its
operation.
• Always wear safety goggles for eye protection. Dress properly , do not wear loose
clothing or jewelry that could become caught in moving parts of the unit. Safe, sturdy,
nonskid footwear should always be worn. Long hair should be tied back. It is
recommended that legs and feet be covered to protect from flying debris during
operation. •Inspect the entire machine for loose parts (nuts, bolts, screws, etc.) and any
damage. Repair or replace as necessary before using the machine.
•DO NOT USE any attachment with this power head other than the ones recommended
by our company. Serious injury to the operator or bystanders could result as well as
damage to the machine.
•Keep the handles free from oil and fuel.
•Always use proper handles and shoulder strap when cutting.
•Do not smoke while mixing fuel or filling tank.
•Do not mix fuel in an enclosed room or near open flames. Assure adequate ventilation.
•Always mix and store the fuel in a properly marked container that is approved by local
codes and ordinances for such usage.
•Never remove the fuel tank cap while the engine is running.
•Never start or run the engage inside a closed room or building. Fumes from the
exhaust contain dangerous carbon monoxide.
•Never attempt to make engine adjustments while the unit is running and strapped to
the operator. Always make engine adjustments with the unit resting on a flat, clear
surface.
•Do not use the unit if it is damaged or poorly adjusted. Never remove the machine's
guard. Serious injury to the operator or bystanders could result as well as damage to the
machine.
•Inspect the area to be cut and remove all debris that could become entangled in the
nylon cutting head. Also remove any objects that the unit may throw during cutting.
•Keep children away. Onlookers should be kept at a safe distance from the work area, at
least 15 METER(50 FEET)
•Never leave the machine unattended
•Do not use this unit for any job other than those for which it is intended as described in
this manual.
•Do not overreach. Keep proper footing and balance at all times. Do not run the unit
