Original Bedienungsanleitung FUXTEC FX-MHP126_de_en_fr_ita_rev05
44
21.
REFUELLING THE DEVICE
WARNING!
-
Gasoline is very highly flammable. Avoid smoking or handling naked flames or
sparks near the fuel.
-
Remove all obstacles before starting work.
-
Also ensure that the engine has stopped and cooled down before refuelling.
-
For this purpose, choose an open area outside buildings.
IMPORTANT!
RECOMMENDED MIXING RATIO: FUEL 40: OIL 1
-
Do not use already mixed oil (2-stroke water cooling) as this can lead to spark
plug contamination and block the exhaust port or cause the piston ring to seize.
-
Using mixed fuel that has not been used for a month or more may cause the
carburettor to clog, resulting in the engine not operating properly. Store excess
fuel in an enclosed container in a cool place. The air-cooled two-stroke engine
consumes a mixture of quality engine oil and regular gasoline (without lead and
without alcohol).
-
The engines should be lubricated with oil that has a special formula for use with
air-cooled 2-stroke petrol engines. We recommend here the
original FUXTEC 2T
Oil (Made in Germany)
to ensure the longevity of the engine.
FUEL MIXTURE
Mix fuel with 2-stroke oil in a container provided for this purpose. Note the following
mixture table for correct fuel/oil ratio. Shake the tank to ensure complete mixing.
WARNING:
Lack of lubrication will exclude the liability of the device manufacturer.
Gasoline and oil must be mixed in the ratio 40:1.
WARNING
Gasoline
Two-stroke engine oil (40:1)
Petrol
Two-stroke engine oil
(40:1)
1 litre
0.025 litres
5 litres
0.125 litres
2 litres
0.050 litres
10 litres
0.250 litres
Gas cap
max. filling
level
