background image

Original User Manual FUXTEC FX-GS36S 

15 
 

8.

 

Customer Service 

The service workshops and dealers provide original spare parts. We recommend that you 
take the device to an authorized service centre for annual maintenance and inspection of the 
protective devices. 
Please  contact  the  dealer  where  you  purchased  the  device  for  more  information  about 
service and spare parts. 

9.

 

Warranty 

The warranty period is 24 months from the date of purchase. Keep your proof of purchase in 
a safe place. Excluded from the warranty are wearing parts and damage caused by improper 
use, use of force, technical modifications, wrong accessories or non-original spare parts, and 
repair attempts by non-qualified personnel. Authorized dealers may only carry out repairs. 
 

10.

  Disposal information 

The device is in packaging to avoid transport damages. This packaging is raw material and 
is  therefore  reusable  or  returned  to  the  raw material  cycle.  The  tool  and  accessories  are 
made  of  different  materials,  such  as  metal  and  plastic.  Take  defective  components  to 
hazardous waste disposal. Please ask at the speciality store or the municipal administration.  
 

Summary of Contents for FX-GS36S


















Reviews: