Original User Manual FUXTEC FX-EB152/FX-EB162_de_en_fr_rev15
43
WARNING
⚫
Petrol is highly flammable and can cause an explosion
in the case of sparks.
⚫
Refuel only in well-ventilated rooms and let the engine
cool down before filling. Smoking and open fire, as well
as any sparks, must be avoided during refueling.
⚫
Do not overfill the tank (see figure max. filling level)
⚫
After refueling, check that the fuel filler cap is properly closed
⚫
Avoid any spillage of petrol.
⚫
Keep the device away from children.
Petrol with an ethanol content
The engine can be operated with E10 petrol. However, do not use petrol with
a higher ethanol content than 10%.
Refilling the gearbox oil
We recommend the gear oil 85W/90GL-5. The oil volume of the gearbox is approx.
360ml, of which only approx. 180ml may be filled.
IMPORTANT:
Please do not fill up the gearbox. Otherwise, the oil will be pressed out
via the oil seal ring, and damage may result. The device must be switched off at the gas
handle (5, p.13). The spark plug (12, p.13) must be removed!
1. Make sure that the ventilation valve is
closed
2. Open oil window and drain used oil
3. Fill 100ml of petrol into the gearbox to clean
the gearbox with it, then empty the petrol
again.
4. Fill the gearbox with max. 180ml gear oil
85W/90GL-5.
5. Clean the oil window before reassembling it.
6. Recheck the oil level according to the
illustration to ensure the correct level.
7. Change the gear oil after approx. 20 working
hours!
WARNING:
Before starting the device, always check the gearbox oil level
via the oil level test window and, if necessary, adjust it so that the oil level
lies between the ranges (Min, Max).
Fuel filler cap
max. filling level
Venting valve
Oil level
Oil level test window
