Original User Manual FUXTEC 20V cordless angle grinder FX-E1WS20
10
Jamming or entanglement affects the rotating accessories, which in turn can lead to uncontrolled
behaviour of the device.
In addition to the general safety recommendations already mentioned, please pay attention to the
following points before and during the use of your cordless angle grinder:
1. Check the accessories carefully before use. There should be no cracks or fissures.
2. Before you start using the angle grinder, make sure that the direction of rotation of the accessories
corresponds to the direction of rotation of the unit.
3. Do not apply too much force during operation, do not let the rotating accessory strike the
workpiece. Doing so may cause the accessory to crack, splinter or come loose, resulting in serious
damage.
4. When using the angle grinder with a cutting disc for cutting, never guide the angle grinder
horizontally, but always cut vertically or diagonally
5. At the beginning of the work, the angle grinder should be started before the workpiece is touched
with the disc.
6 When working with the angle grinder, always wear safety glasses to protect your eyes. Further
wearing of protective clothing such as gloves and hearing protection is also strongly recommended.
7. Always use a protective shield closed at the sides when working with abrasives.
8. Always use the auxiliary handle when working with the angle grinder.
9. Before touching the accessories after work is completed, allow them to cool down.
10. After work, please clean the spindle and all mounted parts. Attention: do not use water - the
angle grinder can be seriously damaged.
11. Operate switches for locking the drive spindle (fig. 1, item 10) only after the device has come to a
complete stop, otherwise the spindle may be damaged.
