Original User Manual FUXTEC Folding/Foldable Wagon
Assembly instructions
Step 1:
Open the velcro fasteners of the carrying bag and make
sure that the front and rear handles do not interlock.
(Optional for specific models such as CT500)
Please unlock the black or red clip on the side before opening.
If not unlocked, there is a risk of breakage.
Pull the clip and only then unfold the wagon.
Step 2:
Pull the front and rear frame rails apart and unfold the
wagon to a fully extended position.
Step 3 (optional):
If you want to use the roof, pull the carbon
rails out of the frame at the corners.
Step 4:
Place the roof over the top of the extended rails
provided for this purpose with the cap on the ending in the cut-
out section of the plastic corner reinforcements. Do not use any
other reducing parts inside the plastic corner reinforcement.
Step 5:
(View from inside part of the roof) Secure all four
corners of the canopy.
Note: The reinforcements of the plastic corners are on the inside
of the canopy.
Summary of Contents for Folding Wagon
Page 1: ......
