QUEST
- REAR EXHAUST
The Quest range hood is equipped with a reversible
Step 1: disconnect 1 plug (on bottom of blower), then
blower mount that allows the user a choice of vertical or
remove 4 screws holding the blower.
horizontal ducting (rear exhaust). A removable knock-out
plate is provided on rear of unit.
Step 2: remove blower, then remove the knock-out plate
Step 3: secure the blower with the 4 screws removed in
on rear wall of range hood. Rotate the blower 90 degrees
Step 2, and reconnect the plug. Connect the range hood to
and insert into the hole left by the knock-out plate.
110V AC power supply and test its operation
prior
to
continuing installation.
