FutureSmart
MDC-108 Installation Guide
Page 2
Connecting Satellite TV (KU Band Only)
1. Run 2 RG6 coax cables from the Satellite Dish to the MDC-108 coax
distribution module. One will be designated as LNB A and the other as
LNB B.
2. Connect the LNB A and LNB B RG6 coax cables coming from the
Satellite dish to the SATV inputs on the back of the MDC-108 coax
distribution module.
SATV Inputs
3. Connect the RG6 coax cable running to the Satellite Receivers in the
rooms to the SATV outputs on the front of the MDC-108 coax distribution
module. If you are using MDP3 patch modules, use coax patch cords to
connect the zones where the receivers are located with the SATV
outputs.
SATV
Outputs
