Page 11
USER CODE AUTHORISATION
Any User Code can be assigned a master code so that code can change or add other codes
and have access to other functions available on this system.
Key Sequence
Operation
Example shows user two [02] code
change.
1. Enter function six [*6].
2.
Enter an existing master code.
3.
Enter the user code to have
changed to a master code.
4.
Enter the four-[4] key.
Repeat
steps 3 and 4 for additional user
codes.
5.
Enter [*] to save changes.
6.
Enter [#][#] when completed.
1
4
*
*
2
6
0
#
#
2
3
4
SETTING THE DOOR CHIME
Chime Mode provides only an audible warning at the premises. A ding-dong is sounded from
the code pad when the protected area is entered, for example, when an infant opens the
door.
The door chime is turned on or off by pressing the
[CHIME]
key while the system is in the
disarmed state. If the chime is on, the chime light will be illuminated. If the chime is off, the
chime light will be off. Each press of the
[CHIME]
key will toggle the chime feature on/off.
Chime Mode must be programmed by your Installation Company. Tell the installer if Chime
Mode is required for any areas.
Key Sequence
Operation
Press the [CHIME] key to turn on or
turn off the chime feature.
Summary of Contents for NX 4
Page 4: ...Page 3...
