Operators and Technicians Manual
2011 – 2014 FutureLogic, Incorporated. All Rights Reserved.
MNL Page 33 04/10/2014
MNL-000067 REV.X03
10
Troubleshooting
Introduction
This chapter describes solutions to the most common ticket printing problems.
Use the LED Status Lights to determine the printer status.
Condition
Ready
(Green)
Paper
(Yellow)
Open
(Orange)
Fault
(Red)
No Power
Ready
ON
*Flashing*
No Ticket Detected
ON
Paper Jam Detected
ON
ON
*Flashing*
Printer Lid Open
ON
Firmware Problem
(Flushed)
ON
ON
ON
ON
Hardware Fault Detected
ON
Printer Troubleshooting
Condition
Remedy
No Power / No LEDs lit.
Check the power from the host. The printer requires 24Vdc.
Press the FEED button, does the ticket advance? Check the LED
module. See page 19 for details how to exchange the LED module.
No Ticket Detected
Remove and reload the tickets (see page 4). The printer must detect
the white-color tickets and black index mark.
Check the Index Mark Sensor (see page 7 for details).
Paper Jam Detected
Perform the ticket jam procedures on page 6.
Printer Lid Open
Close the Lid.
Firmware Problem (Flushed)
Hardware Fault Detected
